Need help?Do you have a question about the aqua-pure AP-RO5500 and is the answer not in the manual?
General| System Type | Reverse Osmosis |
|---|---|
| Filtration Stages | 5 |
| Storage Tank Capacity | 3.2 Gallons |
| Daily Production | 50 gallons per day (GPD) |
| Filter Lifespan | 6-12 months |
| Included Filters | Sediment Filter, Pre-Carbon Filter, RO Membrane, Post-Carbon Filter |
| Membrane | High Rejection TFC RO Membrane |
Defines the purpose and recommended installation for the Aqua-Pure RO drinking water filtration system.
Explains the meaning of WARNING, CAUTION, and CAUTION signal words used in the manual.
Covers warnings related to choking hazards, contaminants, electrical voltage, and physical injury.
Covers cautions for installation and use, focusing on property damage and potential injury.
Details warnings for chemical burns, sanitizer ingestion, and eye injury during drilling operations.
Lists cautions regarding water leakage, freezing, pressure limits, and installation environment.
Provides cautions for servicing, system pressure, filter replacement, and tubing handling.
Highlights key notes on warranty, cartridge replacement space, and tubing handling.
Explains the purpose and recommended professional installation of the RO system.
Key notes on warranty voiding and system preparation for initial use.
Guidance on selecting an appropriate location for the filtration system.
Instructions for preparing the installation site and checking plumbing.
Steps for unpacking and checking the components of the RO system.
Instructions for connecting the faucet adapter and initial tubing.
Procedure for filling and sanitizing the RO system's storage tank.
Steps for connecting the RO system's drain line to the household plumbing.
Guidance on mounting the dedicated RO faucet onto the sink.
Instructions for drilling holes in countertops or sinks for faucet installation.
Procedure for securely installing the faucet, including air gap connections.
Connecting tubing for the faucet and drain line to the system.
Mounting the RO assembly and placing the storage tank.
Completing all tubing connections between system components.
Instructions for connecting the RO system to a refrigerator icemaker.
Procedure for installing the pre-filters and post-filters.
Steps for initial system startup, flushing, and leak checking.
Diagnosing and fixing leaks from the air gap module.
Troubleshooting gurgling or dripping sounds in the drain line.
Identifying causes and solutions for the system not producing water.
Addressing issues where the system is not producing enough water.
Recommendation to periodically test water quality for system performance.
Guidance on when and how to replace pre-filters and post-filters.
Information on when and how to replace the RO membrane.
Procedure for sanitizing the storage tank upon startup and after maintenance.
Procedure for sanitizing the RO assembly using household bleach.
To Next Page
