EasyManua.ls Logo

Aqua Select 832402B - Important Safety Instructions; Tools Required for Assembly

Aqua Select 832402B
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Small rubber mallet or hammer w/piece of wood
Phillips head screwdriver
Pliers
Liquid soap or lubricant
40 lbs. of sand (sold separately)
Funnel
TOOLS REQUIRED
AQUA SELECT
®
EVEREST STEP
(832402B)
This carton (832402B) contains ALL the necessary pieces and instructions for installation of your new
step. Please follow all instructions for proper installation of this step.
AQUA SELECT® BRIDGE SYSTEM
(832421B)
There are four cartons necessary to install your new bridge. You should have 2 step cartons
(832402B) which include the instructions necessary to install the steps only. The third carton is marked
(832405B) and this contains the crossover necessary to connect the two steps. The instructions for the
assembly and installation of the crossover are located in the crossover box. Carton 4 is the gate carton
(832406) which includes the necessary components for the gate and instructions for gate installation.
NOTE
The sequence of the instructions may vary at points depending on the type
of step system that you have purchased. If there are different instructions for
your system, it WILL BE indicated within the step.
Please follow these notes to avoid additional steps and wasted time.
The Ladder must be installed based on Manufacturer’s Instructions
One person on the Ladder/Stair at a time
This Ladder is designed and manufactured for a specific Pool Wall Height
and/or Deck of the Pool
For Entry/Exit of pool, face the ladder at all times
Remove and secure Ladder when pool is not occupied
The Ladder will be suitable up to 54” Maximum Pool Height
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ PRIOR TO ASSEMBLY/USE
AQUA SELECT
®
EVEREST STEP WITH FLIP UP OUTSIDE LADDER
(832401BK)
AQUA SELECT
®
EVEREST STEP WITH IN POOL LADDER
(832406EV)
This is carton 1 of 2. The step and the necessary instructions for installation are included within this
carton. You should have a second carton labeled (832420) which contains the outside ladder for
this system. All the necessary instructions for installation of the ladder are located inside the second
carton.
There are four cartons necessary to install your entry system. You should have 1 step carton
(832402B) which includes the instructions necessary to install the step only. The second carton is
marked (832406SC) and this contains the In Pool Ladder as well as assembly and attachment
instructions to the step. Cartons three and four are (832406) Gate and (832405P) Pickets each box
contains assembly and attachment instructions to enclose your entry system.

Related product manuals