EasyManua.ls Logo

aqua technix AQUA Master Series User Manual

aqua technix AQUA Master Series
24 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Original Gebrauchsanweisung
Original installation and operating manual
Instructions de montage et d’utilisation
originales
AQUA Master
AQUA
TECHNI
Umwälzpumpen, selbstansaugend
6ZLPPLQJSRRO¿OWHUFLUFXODWLRQSXPSVVHOI-priming
Pompes de circulation, auto-amorçantes
D
GB
*Beantragt / approval pending /
Demande du sigle GS en cours /
*
F
Question and Answer IconNeed help?

Do you have a question about the aqua technix AQUA Master Series and is the answer not in the manual?

aqua technix AQUA Master Series Specifications

General IconGeneral
Voltage230V
Port Size2 inches
Max Flow Rate120 GPM
Inlet/Outlet Size2 inches
Body MaterialThermoplastic
Seal MaterialCeramic

Summary

General

Safety

Possible User Errors

Identifies common mistakes users might make during pump operation.

Safety Symbols

Explains the meaning of various warning and caution symbols used in the manual.

Residual Risks

Details potential hazards not eliminated by protective measures, such as falling parts.

Safety: Specific Hazards

Rotating Parts Hazards

Warns about the dangers of exposed rotating parts and precautions to take.

Electrical Safety

Highlights electrical hazards like electrocution and necessary safety measures.

Hot Surface Risks

Advises on the risk of burns from hot motor surfaces and cooling procedures.

General Handling and Transportation

Installation Guidelines

Installation Site Requirements

Specifies requirements for the installation site, including ventilation and drainage.

Outdoor Installation Protection

Recommends weather protection for pumps installed outdoors.

Noise and Mounting Considerations

Provides guidance on reducing noise and proper mounting methods.

Pump Installation Position

Specifies the correct water level and horizontal position for pump installation.

Electrical Connection

Qualified Personnel for Electrical Work

States that electrical connections must be performed by qualified experts.

Electrical Safety Standards and Cables

Details safety regulations, circuit protection, and required cable types for electrical connections.

Initial Start-up Procedure

Pump Priming

Outlines the steps for filling the pump with water before initial start-up.

Maintenance and Care

Pre-Maintenance Safety Precautions

Instructs to switch off power and close valves before performing maintenance.

Strainer Basket Cleaning and Draining

Explains periodic emptying of the strainer basket and draining for freezing protection.

Repairs

Authorized Service Center for Repairs

States that repairs should only be carried out by authorized service centers.

Recommendations for Use

Installation Environment Recommendations

Recommends installing the pump in a lockable room and ensuring adequate ventilation.

Technical Data

Pump Specifications and Performance

Provides key technical data including power, current, weight, and motor details.

Dimensions and Flow Curves

Presents detailed dimensions and performance curves showing head vs. flow rate.

Troubleshooting Common Issues

Malfunctions and Solutions

Lists common pump malfunctions, their causes, and recommended solutions.

EC Declaration of Conformity

Applicable Standards and Directives

Lists the EU directives and harmonized standards the pump complies with.