To Next PageTo Next Page
Need help?Do you have a question about the aqua technix AQUA VARIO Plus and is the answer not in the manual?
General| Type | Submersible Pump |
|---|---|
| Max Head | 3.5 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Protection Class | IP68 |
| Cable Length | 10 m |
Key safety warnings, symbols, and potential user errors.
Explanation of warning symbols and hazardous situations.
Hazards from rotating parts and necessary precautions.
Guidance on transportation, storage, and material resistance.
Conditions and requirements for the pump's installation location.
Recommendations for outdoor protection and reducing noise.
Guidelines on optimal pump placement for suction and head loss.
Safety measures before performing maintenance.
Instructions for cleaning the strainer and draining the pump.
Information on who should perform repairs.
Guidelines for optimal pump installation environment and airflow.
Detailed technical specifications for the pump at different speeds.
Visual representation of pump dimensions.
Graphs illustrating pump performance characteristics.
Description of the motor's controller and its buttons.
Default speed, priming speed, and priming time settings.
How to start, stop, and operate the pump.
Adjusting fixed speeds and configuring priming parameters.
Instructions to restore the motor controller to default configurations.
How the pump behaves after a power interruption.
A comprehensive list of error codes and their meanings.
A table detailing problems, causes, and corrective actions for the pump.
