BATTERY PLACEMENT UNDER TOP CAP
www.aquavuhelp.com
Scan to visit our Video Resource Library for
additional tips & instructional content.
MO-POD 3
CAMERA PANNING ACCESSORY
Aqua-Vu MO-POD 3 Quickstart Guide and FAQ’s.
1) Remove top cap lid to battery compartment. Lid screws off counter clockwise.
2) Install 2 new AA batteries.
3) Replace lid.
4) Turn MO-POD 3 to On by toggle switch found on the underside of the MO-POD.
5) Adjust MO-POD 3 base legs to exceed size of hole.
6) Deploy camera to desired depth and secure cable to the S-Hook of MO-POD 3.
7) Use Wireless remote to pan the camera 360-degrees clockwise or counter clockwise.
FAQ & Trouble Shooting
Q: Can the MO-POD 3 be used with a 10-inch hole?
A: Yes, the legs will fold completely flat with loosening of the string.
Q: My MO-POD 3 will not turn?
A: Please double check the power switch and change the batteries.
Q: My MO-POD 3 still does not turn?
A: Your MO-POD 3 may need to be synced to the remote. Visit the link
below and search MO-POD 3 for a video on this process.
ON/OFF TOGGLE SWITCH LOCATED ON
THE UNDERSIDE
WIRELESS REMOTE
To Next Page
Need help?
General