What to do if there is no water or little water in Aqua-world PASRW010 Heat Pump system?
If there's little to no water in your Aqua-world Heat Pump system, it could be due to a flow switch failure (E03). Check the water flow volume and verify if the water system pump is working correctly.
Why is there a big temperature difference between water inlet and outlet in my Aqua-world PASRW010 Heat Pump?
A significant temperature difference between the water inlet and outlet in your Aqua-world Heat Pump may be due to insufficient water flow or a small pressure difference in the water system. Check the water flow volume and inspect the water system for any blockages.
What causes high exhaust pressure in Aqua-world PASRW010?
High exhaust pressure in your Aqua-world Heat Pump is often caused by high pressure protection (E01). Check the high pressure switch action and the cooling return circuit.
Why is the suction pressure low in my Aqua-world PASRW010 Heat Pump?
Low suction pressure in your Aqua-world Heat Pump can be triggered by low pressure protection (E02). Check the low pressure switch action and the cooling return circuit.
How to fix communication failure in Aqua-world PASRW010 Heat Pump?
A communication failure in your Aqua-world Heat Pump indicates a problem between the remote wire controller and the main board. Check the wire connection between these components.
What to do if Aqua-world Heat Pump is antifreezing under cooling mode?
If your Aqua-world Heat Pump is antifreezing during cooling mode, it could be due to insufficient water flow volume. Inspect the flow volume and ensure the water system is not blocked.
How to fix water inlet temp sensor issue in Aqua-world PASRW010?
If the water inlet temperature sensor in your Aqua-world Heat Pump is open or short-circuited, it's likely due to a sensor failure (P01). Check or replace the water inlet temperature sensor.
What to do if the water outlet temperature sensor is open or short circuit in Aqua-world PASRW010 Heat Pump?
If the water outlet temperature sensor in your Aqua-world Heat Pump is open or short-circuited, it indicates a sensor failure (P02). Check or replace the water outlet temperature sensor.
How to resolve pipe temperature sensor issues in Aqua-world Heat Pump?
If the pipe temperature sensor in your Aqua-world Heat Pump is open or short-circuited, it suggests a sensor failure (P05). Check or replace the pipe temperature sensor.
How to troubleshoot evaporator temperature sensor failure in Aqua-world PASRW010?
To troubleshoot an evaporator temperature sensor failure in your Aqua-world Heat Pump, check or replace the evaporator temperature sensor.
General| Brand | Aqua-world |
|---|---|
| Model | PASRW010 |
| Category | Heat Pump |
| Language | English |
To Next Page