Aqua PH-02650 - User Manual

AIR TO WATER POOL HEAT PUMP VERTICLE PH SERIES
1/ 52 VERSION 19 , RELEASE 29th June 2020
1
/
52
AIR TO WATER POOL HEAT PUMP VERTICLE PH SERIES
1
/
41
SWIMMING POOL HEAT PUMP UNIT
Installation & Instruction manual

Summary

PREFACE

1.2 Safety precautions

Important safety warnings and precautions for operation and installation.

SPECIFICATIONS

2.3 Performance data for Swimming Pool Heat Pump Unit

2.4 Dimensions for Swimming Pool Heat Pump Unit

Installation and Connection

3.1 Installation of System

Guidance on setting up the heat pump system, including plumbing.

3.2 Swimming Pool Heat Pumps Location

Recommendations for optimal placement of the heat pump unit.

3.4 Swimming Pool Heat Plumbing

3.5 Swimming Pool Heat Pumps Electrical Wiring

Instructions for safe and correct electrical connections.

3.6 Initial Start-up

Step-by-step guide for the first operation of the heat pump.

USAGE AND OPERATION

4.4 How to set your desired water temperature

Steps to adjust the target water temperature.

4.5 How to change parameter setting

4.8 How to set timer on and timer off

Instructions for programming the ON/OFF timers.

5.0 Manual;forced defrosting

PROTECTION SYSTEMS

5.2 Refrigerant gas high- and low-pressure protection

DIRECTION

6.2 Heat pump winterizing

Steps for preparing the unit for winter storage.

6.3 Restarting the pump after winter

MAINTENANCE AND INSPECTION

7.1 Maintenance

General maintenance tasks for the heat pump unit.

7.2 Trouble shooting guide

Guidance for diagnosing and resolving common issues.

7.3 Malfunction table

A comprehensive list of error codes and their solutions.

Performance curve

Spare part list

Aqua PH-02650 Specifications

General

Brand	Aqua
Model	PH-02650
Category	Heat Pump
Language	English