Aqua STANDARD Series - User Manual

To Next Page

MANUALE DI INSTALLAZIONE E MANUTENZIONE

INSTALLATION AND MAINTENANCE MANUAL

MANUEL D’INSTALLATION ET D’ENTRETIEN

EINBAU-UND BETRIEBSANLEITUNG

MANUAL DE INSTALACIÓN Y MANTENIMIENTO

SERIE “STANDARD”

Halogen bulb

FARO SUBACQUEO

UNDERWATER LIGHT

PROJECTEUR SOUS-MARIN

UNTERWASSER-SCHEINWERFER

PROYECTOR SUBACUÁTICO

Main Page

Need help?

Do you have a question about the Aqua STANDARD Series and is the answer not in the manual?

Summary

Safety Precautions

Warning Symbols

Symbols indicate the possibility of death, serious injury, or damage.

Verify Contents of Packing

General Characteristics

Installation

Concrete Swimming Pool Installation

Fix the housing (no. 12) in the wall of the swimming pool, ensuring cable outlet is on top.

Prefabricated Swimming Pool Installation

Make a 240 mm hole, install housing (no. 12) and adhesive joints (no. 18) on the outer side.

Assembly

Maintenance

Maintenance Safety Notes

Ensure no voltage, use correct lamp, clean/replace O-ring for water tightness.

Start-Up

Safety Warnings

General Safety Guidelines

Covers qualifications, electrical safety, standards compliance, maintenance safety, and handling precautions.

Technical Characteristics

Exclusive Use With Safety Transformer

Operation Safety: Submerged Only

Aqua STANDARD Series Specifications

General

IP Rating	IP68
Type	Underwater lighting
Beam Angle	120 degrees
Color Temperature	3000K, 4000K, 6000K
Material	Stainless steel 316
Power	18W