Aquadart Rolla 8 User Manual

Note: This instruction shows the installation process for all of our Rolla 8 configurations, please check below
which pages are relevant to your configuration before commencing work:
INSTALLATION INSTRUCTIONS
www.aquadart.co.uk
Drill
6mm Masonry Drill
2.75mm HSS Drill
Spirit Level
Sealant Gun
Tape Measure
PH2 TYPE
Screwdriver
Pencil
Hex Wrench
Tools Required
Please note hand tools NOT supplied
This product should be installed by a suitably qualified and proficient person. The fitting instructions should be
followed carefully to ensure a proper and safe installation. Failure to follow these instructions could result in future
injury.
These instructions and list of parts assume that installation is done against solid/tiled walls.
Please check this product for damage prior to starting the installation. No claims can be made after the product has
been fitted.
PLEASE NOTE :The minimum and maximum adjustment sizes noted on the product brochures are based on
perfectly plumb walls and trays.
SLIDING WETROOM, ENCLOSURE & DOOR
1
Sliding Wetroom refer to pages 1-8 • Sliding Door Recess refer to pages 9-15 and page 25
Sliding Door Enclosure refer to pages 16-24 and page 26 • Aftercare refer to page 27

Aquadart Rolla 8 Specifications

General

Brand	Aquadart
Model	Rolla 8
Category	Shower Cabins
Language	English

Summary

Sliding Wetroom, Enclosure & Door Installation Instructions

Tools Required for Installation

Lists all tools necessary for the installation process.

Important Installation Notes

Crucial safety and site preparation guidelines before fitting.

Sliding Wetroom Components

Detailed list and diagram of parts for the wetroom.

Sliding Wetroom Fixing Kit and Site Conditions

Details on fixing components and site preparation for the wetroom.

Sliding Wetroom Installation Steps

Step-by-step guide for installing the sliding wetroom.

Sliding Door Components

Detailed list and diagram of parts for the sliding door.

Sliding Door Fixing Kit and Site Conditions

Details on fixing components and site preparation for the sliding door.

Sliding Door Installation Steps

Step-by-step guide for installing the sliding door.

Sliding Enclosure Components

Detailed list and diagram of parts for the enclosure.

Sliding Enclosure Fixing Kit and Site Conditions

Details on fixing components and site preparation for the enclosure.

Sliding Enclosure Installation Steps

Step-by-step guide for installing the sliding enclosure.

Closing Seal Fitting

Guidance on how to properly install the closing seal.

Optional Corner Post Fitting

Instructions for fitting the optional corner post accessory.

Aftercare

Shower Enclosure Cleaning

Proper methods for cleaning the enclosure after use.

Product Usage Recommendations

Tips for reliable, watertight performance and preventing leaks.

Clean & Clear Glass Treatment

Details on the easy-clean glass coating and its advantages.

Product Warranty Details

Information regarding the limited 5-year warranty for the glass treatment.