Need help?Do you have a question about the Aquadart Venturi 8 and is the answer not in the manual?
Lists essential tools for shower enclosure installation.
Highlights crucial safety and preparation steps before installation.
Instructions on verifying all parts are present before starting installation.
Specifies essential site conditions and preparation for a proper shower enclosure fit.
Install the shower tray according to its specific installation guide.
Connect fixed panels using horizontal rails and fixing screws.
Place assembly on tray and mark wall channel positions.
Drill marked points and insert wall plugs for channel mounting.
Fix the wall channels to the wall using appropriate screws.
Secure the enclosure assembly to the wall channels with screws.
Fit the specified seals onto the edges of the fixed panels.
Mount the door handle and attach top and bottom rollers.
Hang the door by guiding rollers into rails and adjust as needed.
Attach cover caps and apply final silicone sealing.
Guidance on cleaning the enclosure and proper usage to ensure longevity.
Information on the product warranty and reapplication kits.
To Next Page
General