Need help?Do you have a question about the Aquaguard BS9251 and is the answer not in the manual?
Overview of key operating modes including Jockey, Fire, Test, Maintenance, Event Log, and Setup.
Detailed explanation of the controller's buttons, LEDs, and display interface components.
Description of the information presented on the controller's home screen.
General safety and pre-installation requirements for qualified electricians.
Wiring instructions for connecting the AquaGuard Fire Pump Controller as per the diagram.
Procedure to configure pump current and power parameters on the controller via the main menu.
Steps to set the current time and date on the controller's display.
Procedure for filling the sprinkler system and initial controller operation after power-up.
Guidance on adjusting the system pressure switch to appropriate settings.
Instructions for performing a flow test to verify pump performance and system requirements.
Steps to initiate a weekly test for solenoid and pump operation verification.
Procedure to reset the annual maintenance reminder after a flow test.
How to access and navigate the controller's event log for historical data.
General| Model | BS9251 |
|---|---|
| Brand | Aquaguard |
| Frequency | 50 Hz |
| Type | Controller |
| Usage | Water Purifier |
| Display | LED |
To Next Page