EasyManua.ls Logo

AquaJet 55AQUAJET-AES User Manual

AquaJet 55AQUAJET-AES
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.remcotowing.com | www.remcoindustries.com | REMCO INDUSTRIES 1
24 REMCO INDUSTRIES | www.remcoindustries.com | www.remcotowing.com
Please read the following instructions before attempting an installation.
When properly installed, Aquajet Series pumps can be used in virtually
any existing RV.
If you prefer to have the pump professionally installed, contact Remco
(763-253-4743) to locate your nearest authorized service center.
WARNING
The 5-chamber Aquajet Series pumps are more powerful than most
existing RV water pumps and, as a result, may draw more current
(Amps) than the pump(s) they replace. It is imperative that any power
supply, fuses/circuit breakers, wiring, switches, connectors, or
controllers that are used to supply 12 VDC to the pump are adequately
sized. Inadequately sized components may overheat, causing an
electrical fire.
When installing an Aquajet Series pump, positive voltage (+12VDC)
must be connected to the Aquajet's red fused leadwire. Reversing
polarity will instantly blow the fuse and may permanently damage
the controller.
User’s Manual and Installation Guide
55AQUAJET-AES – 3.4 GPM/12VDC, WITH FUSE
55AQUAJET-OES – 3.4 GPM/12VDC, NO FUSE
55AQUAJET-ARV – 5.0 GPM/12VDC, WITH FUSE
55AQUAJET-ORV – 5.0 GPM/12VDC, NO FUSE
Aquajet
RV Water
System Pumps
Question and Answer IconNeed help?

Do you have a question about the AquaJet 55AQUAJET-AES and is the answer not in the manual?

AquaJet 55AQUAJET-AES Specifications

General IconGeneral
BrandAquaJet
Model55AQUAJET-AES
CategoryWater Pump
LanguageEnglish

Summary

Aquajet RV Pump Product Overview

Model Identification and Key Features

Lists available Aquajet RV pump models and their primary features.

User's Manual and Installation Guide

General Installation Guidance

Provides initial instructions before attempting installation.

Critical Electrical Safety Warning

Warns about potential electrical hazards and improper wiring.

Essential Safety Tips for Pump Operation

Guidelines for Safe Pump Usage

Outlines important safety practices during pump operation and maintenance.

Qualifications for Pump Installation

Required Skills for DIY Installation

Details the technical skills needed for a competent DIY installation.

Installation Planning and Requirements

Tools, Supplies, and Planning Steps

Lists necessary tools, electrical supplies, and planning considerations.

Specific Model Installation Considerations

Notes specific planning steps for ORV and ARV series pumps.

Remco Aquajet Pump Warranty Details

Troubleshooting Electromagnetic Interference

Resolving Noise and Interference Issues

Provides solutions for electromagnetic interference affecting audio or video systems.

Troubleshooting Common Pump Malfunctions

Addressing Low Flow or Pressure Issues

Diagnoses and resolves problems related to reduced water flow or pressure.

Resolving Excessive Pump Noise

Offers solutions for pumps operating with unusually high noise levels.

Troubleshooting Pump Operation Issues

Solutions for Pump Leaks

Provides methods for fixing leaks from pump fittings or components.

Pump Runs Continuously Without Demand

Addresses scenarios where the pump fails to shut off automatically.

Installation Planning for OES/AES Series

Electrical System Compatibility Checks

Guides on checking RV wiring and controllers for OES/AES series pumps.

Troubleshooting Pump Priming and Cycling

Resolving Pump Rapid Cycling Issues

Solutions for pumps that cycle on and off frequently.

Diagnosing Pump Priming Failures

Steps to resolve issues where the pump does not draw water.

Comprehensive Aquajet Troubleshooting Guide

Troubleshooting: Pump Does Not Run

Covers causes and solutions for a non-operational pump.

Troubleshooting: Pump Rapid Cycling

Explains how to fix pumps that cycle on and off too frequently.

Aquajet Pump Installation Procedure

Wiring and Plumbing Connection Steps

Step-by-step guide for connecting the pump's electrical and plumbing.

Installation Details and Wiring Diagrams

Electrical Wiring Diagrams for Installation

Visual schematics illustrating pump wiring configurations.

Plumbing and Mounting Instructions

Guidance on physically mounting the pump and connecting plumbing.

Finalizing Aquajet Pump Installation

Pump Operation Verification and Testing

Steps to test the pump after installation for leaks and function.

Pressure Adjustment and Final Checks

Instructions for adjusting pump pressure and performing final checks.

Aquajet RV Pump Technical Specifications

Model Number and Part Identification

Details on identifying the specific Aquajet pump model and its part number.

Detailed Component Specifications

Comprehensive technical data on motor, materials, fittings, and certifications.

Aquajet RV Pump Performance Data

Discharge Pressure vs. Flow and Current

A table showing performance metrics at different discharge pressures.

Pump Heat Rise Characteristics

A graph illustrating how the pump temperature changes over time during operation.