What to do if the water pressure is too low on my AquaJet Personal Care Products?
If you're experiencing low water pressure with your AquaJet Personal Care Products, it might be due to the water pressure regulation switch being in the wrong position. Adjust the switch to the most suitable setting. Also, make sure the water tank is placed correctly.
Why is the pump working but no water is spraying out of my AquaJet LD-A7 Personal Care Products?
If the pump in your AquaJet Personal Care Products is running but no water is coming out, it's likely that the water tank is empty. Refill the water tank, and after a few seconds, the water stream should start jetting out.
General| Brand | AquaJet |
|---|---|
| Model | LD-A7 |
| Category | Personal Care Products |
| Language | English |
Fill water or mouthwash water into the tank, ensuring temperature does not exceed 40°C.
The power cord and plug are stored in a rear storage box for convenience and safety.
Attach nozzle to handle until it locks; detach without rotation to prevent damage.
Press the power button to start the device; run for seconds until water flows for first use.
To Next Page
