To Next PageTo Next Page
Need help?Do you have a question about the AQUAJOE SJI-TLS18 and is the answer not in the manual?
The main structural component of the sprinkler.
The 18 nozzles responsible for water dispersal.
The tube that moves the spray arm back and forth.
The connection point for the water hose.
Tabs used to adjust the sprinkler's spray distance.
First set of tabs to control spray width.
Second set of tabs to control spray width.
Filter located at the water inlet to prevent debris.
Tool used for clearing clogged spray nozzles.
Using range sliding tabs to adjust spray distance (Fig. 1).
Using width sliding tabs to control spray pattern (Fig. 3, 4).
Procedure for cleaning the inlet filter from debris (Fig. 6).
Locating and removing the cleaning pin from the oscillator (Fig. 7).
Steps to flush the oscillator tube with running water (Fig. 8).
Using the cleaning pin to clear clogs from spray nozzles (Fig. 9).
Instructions for registering your product purchase for service needs.
Defines who can seek warranty coverage and for what use.
Specifies covered defects and remedies like replacement or refund.
Lists conditions and parts not covered by the product warranty.
Information on chemical exposure risks and safety measures.
General| Brand | AQUAJOE |
|---|---|
| Model | SJI-TLS18 |
| Category | Irrigation System |
| Language | English |
