Need help?Do you have a question about the Aqualisa HiQu and is the answer not in the manual?
List of components included with HP/Combi systems.
List of components included with Gravity Pumped systems.
Essential safety precautions and regulatory compliance for installation and use.
Specific installation guidelines for the pumped processor with gravity systems.
Guidance for installing standard processors with high pressure and combi systems.
Key considerations for installing with combination boiler systems.
Specific advice for installing with separately pumped gravity systems.
Details on product connections, pipe sizing recommendations, and flushing procedures.
Final actions after installation, including user familiarization and warranty.
Ensuring safe operation by installing the processor in approved orientations.
Fitting isolation valves and choosing the processor's installation position.
Mounting the processor, flushing pipes, and connecting supply and outlet pipes.
Preparing the wall, fitting the back plate, and securing it with mastic.
Attaching the controller to the back plate and connecting the data cable.
Connecting the processor power lead and low voltage data cable.
Setting the flow rate mode and restoring power to the system.
Adjusting the maximum bath temperature setting as required.
Information regarding the Waste Electrical and Electronic Equipment regulations.
Contact information for Aqualisa Products Limited and warranty notes.
To Next Page
General