AQUALUX MIXY PH 1.8-01

Need help?

Do you have a question about the AQUALUX MIXY PH 1.8-01 and is the answer not in the manual?

Summary

PIECES DETACHEES

GARANTIE

GENERAL COMMENTS

WARNINGS

Important safety instructions and general advice for the use and maintenance of the pump.

DESIGN STANDARD

Details on the pump's compliance with European directives and quality standards.

TECHNICAL CHARACTERISTICS

GENERAL RULES

Guidelines for pump installation, including orientation and environmental conditions.

STANDARD ACCESSORIES SUPPLIED

Lists the standard accessories included with the peristaltic pump models.

ELECTRICAL CHARACTERISTICS

Specifies the power supply requirements for the pump.

ELECTRIC CONNECTION

Instructions for safely connecting the pump to the electrical supply.

HYDRAULIC CONNECTION FIG.I

Details on how to connect the suction and delivery hoses to the pump.

OPERATION

Explains the operating principle of the peristaltic pump mechanism.

MAINTENANCE

GENERAL MAINTENANCE COMMENTS

General advice emphasizing the importance of regular maintenance for long-term pump service.

PERIODIC MAINTENANCE

Details on monitoring liquid levels and inspecting wet parts of the pump.

BASIC MAINTENANCE PROCEDURES

Step-by-step procedures for basic maintenance, including flushing the hose with water.

REPLACING WORN PARTS

Instructions for replacing common worn parts like fuses and peristaltic hoses.

STORAGE OF THE PUMP AFTER THE USE

Recommendations for cleaning and storing the peristaltic hose after pump use.

COMMONLY REPORTED PROBLEMS

Troubleshooting guide for common issues like pump not functioning or no liquid injection.

WARRANTY CERTIFICATE

OPERATING INSTRUCTIONS (MIXY PUMP PH 1.8-01)

ON;OFF SYSTEM

Explains how the on/off system controls the pump based on set pH values.

PUT INTO OPERATION

Instructions for connecting the probe and putting the pump into operation.

DESCRIPTION OF FUNCTIONS

Defines key functions like Type of dosing, Zero Calibration, Gain Calibration, and Set-point.

PROGRAMMING

Details the steps for programming the pump, including setting type of dosing and calibration.

EXAMPLES OF PROGRAMMATION

Provides examples of programming the pump for specific pH dosing scenarios.

OPERATING INSTRUCTIONS (MIXY PUMP RX 1.8-01)

ON;OFF SYSTEM

Explains the on/off system for maintaining desired Rx values in the plant.

PUT INTO OPERATION

Instructions for connecting the probe and putting the RX pump into operation.

DESCRIPTION OF FUNCTIONS

Defines functions for the RX pump: Type of dosing, Zero Calibration, Gain Calibration, Set-point.

PROGRAMMING

Details the steps for programming the RX pump, including setting type of dosing and calibration.

EXAMPLES OF PROGRAMMATION

Provides examples of programming the pump for specific Rx dosing scenarios.

ELECTRODE CLEANING AND SERVICING

Instructions for cleaning and servicing the RX electrode.