Aquaparx SPA550 User Manual (English)

Questions and Answers:

E
eatonlauraAug 4, 2025
What to do if my Aquaparx Hot Tub heating system does not operate?
- A
  Alicia SchaeferAug 4, 2025
  If the heating system isn't working, there are several possible causes. First, check that the temperature isn't set too low; adjust it to a higher temperature (between 20-42°C). Also, a dirty filter cartridge can cause issues, so clean or replace it. Ensure the water level is at the specified level, adding water if needed. If none of these steps work, the heating element may have failed, requiring professional service.
T
thomasrebeccaAug 10, 2025
Why is my Aquaparx Hot Tub water not clean?
- R
  ronaldbryantAug 10, 2025
  If the water in your Aquaparx Hot Tub isn't clean, it could be due to a few reasons. You might not be filtering the water for long enough, so try increasing the filtration time. Another common cause is a dirty filter cartridge; make sure to clean or replace it. Finally, improper water maintenance can be the culprit; refer to the chemical manufacturer’s instructions for guidance.
R
Robert MontesAug 16, 2025
What to do if my Aquaparx Hot Tub filtering system does not operate?
- S
  Stephanie MaciasAug 16, 2025
  If the filtering system on your Aquaparx Hot Tub isn't working, start by checking the filter cartridge for dirt and clean or replace it as needed. If that doesn't solve the problem, there may be an issue with the power box, and you should call for service if it doesn't reset. Also, have a professional electrician check if the household input voltage or frequency is normal, as too low voltage or an incorrect frequency can cause problems.