AQUARAY Control - Page 7

5
MODE DISPLAY COMMENTS
Run HH:MM:SS Clock display
Set Time (Hour) SET TIME Use ‘+’ and ‘-’ to
H
H:MM set the time
Set Time (Minute) SET TIME Use ‘+’ and ‘-’ to
HH:MM set the time
Set On (Hour) ON Use ‘+’ and ‘-’ to
HH:MM set the on time
Set On (Minute) ON Use ‘+’ and ‘-’ to
HH:MM set the on time
Set Off (Hour) OFF Use ‘+’ and ‘-’ to
HH:MM set the off time
Set Off (Minute) OFF Use ‘+’ and ‘-’ to
HH:MM set the off time
Set Ramp RAMP Use ‘+’ and ‘-’ to
MM set the length of
time the dimming
process takes in mins
Set Channel 1 CH 1 LEV Use ‘+’ and ‘-’ to set the
Level 1
00 on level of Channel 1
as percentage output
Set Channel 2 CH 2 LEV Use ‘+’ and ‘-’ to set the
Level 1
00 on level of Channel 2
as percentage output
Set Channel 1 CH 1 MIN Use ‘+’ and ‘-’ to set the
Minimum Level 0
05 off level of Channel 1
as percentage output
Set Channel 2 CH 2 MIN Use ‘+’ and ‘-’ to set the
Minimum Level 0
05 off level of Channel 2
as percentage output