Doc. No: 01999972M
Revision: A 1 of 2
Issue Date: 08/15/21
Aquarion
®
AQ100
Tools Needed
1. Flat-head screw driver
Clip Tray Lock
It is recommended that the Aquarion
®
clip tray lock be removed to allow the tray to open more smoothly and the piercing
tube to fully engage the Aquarion
®
fluid cartridges. The clips are located where the eye wash tray engages with the shell
base, see Figure 1.
The clip tray lock is easily removed by taking a flat-head screw driver and prying the clip from the base. See Figure 2.
INSTALLATION
•
OPERATION
•
MAINTENANCE MANUAL
SELF-CONTAINED EYEWASH STATION
PRODUCT MAINTENANCE
(Fig. 1) Location of clip tray locks
(Fig. 2) Use flat-head screw driver to pry off clips.
To Next Page
Need help?
General