Need help?Do you have a question about the Aquasafe WSL50 Pro and is the answer not in the manual?
Overview of the portable field laboratory for water quality testing.
Details of all components included in the AquaSafe WSL50 Pro kit.
Guidance on operating the AquaSafe WSL50 Pro incubator.
Explanation of the incubator's physical controls and switches.
Initial steps for setting up and starting the incubator.
Navigation and options within the incubator's menu system.
Step-by-step menu flow for the left incubator chamber.
Step-by-step menu flow for the right incubator chamber.
Description of the initial display screen and its status indicators.
Instructions for using the pre-programmed 37°C incubation cycle.
Instructions for using the pre-programmed 44°C incubation cycle.
Procedure for setting custom temperature profiles for incubation.
Steps to reset the incubator's timer and elapsed time data.
How to adjust the incubation cycle duration.
Guide to setting user-defined incubation temperatures.
Instructions for calibrating the incubator's temperature.
Guidelines for maintaining and caring for the AquaSafe incubator.
General advice on the maintenance requirements of the incubator.
Detailed instructions on how to clean the incubator and its components.
Specific maintenance tasks for the incubator's parts.
Technical data for the AquaSafe WSL50 Pro.
Technical details regarding the docking station.
Technical details regarding the incubator unit.
Information on warranty coverage and how to get technical support.
Step-by-step guide to assembling the membrane filtration equipment.
Procedure for preparing microbiological media in a lab setting.
Method for preparing microbiological media in a field environment.
Guidelines and techniques for collecting water samples.
Information on the proper use and storage of bacteriological media.
Critical aseptic techniques for microbiological analysis.
Steps for processing water samples for coliform analysis.
How to count coliform colonies and record the analysis results.
Guidance on choosing appropriate sample volumes for accurate filtration.
Overview of the HT1000 photometric analyser and its capabilities.
Comprehensive guide to the operation of the HT1000 photometer.
Steps for initial setup and configuration of the photometer.
Critical information regarding data saving during battery changes.
Procedure for safely replacing the photometer's batteries.
Labeled diagram illustrating the photometer's components.
Explanation of the functions of each key on the photometer.
How to view the current date and time settings on the display.
Guide to setting and using the user-defined countdown timer.
Instructions for adjusting the LCD display backlight.
Overview of the different operational modes available on the photometer.
How to configure the automatic power-off feature.
Steps for selecting the appropriate measurement method.
Accessing detailed information about selected measurement methods.
Viewing available chemical species and their ranges for a method.
How to differentiate results for methods like chlorine.
Procedure for setting the instrument's zero point before measurement.
Steps involved in conducting a measurement test.
How to switch between different chemical species for a test.
Instructions for saving test results with optional codes.
Guidance on printing test results using the optional PC-Link.
How to perform subsequent tests using the same method.
Steps to choose and start a different measurement method.
Procedure for measuring sample absorbance at specific wavelengths.
Configuring initial instrument settings like language and key beep.
How to set the instrument's internal clock and date settings.
Managing the reaction time countdown feature.
Adjusting audible signals for measurements and countdowns.
Instructions for printing all stored measurement data.
How to print results within a specified date range.
Printing results based on a range of assigned code numbers.
Printing data for a specific selected measurement method.
Managing stored measurement data by recalling or deleting it.
Retrieving all saved measurement data from the instrument's memory.
Accessing stored results based on the date they were recorded.
Retrieving stored data using a range of code numbers.
Accessing stored results filtered by the measurement method used.
Process for clearing all stored measurement data from the instrument.
Guides for calibrating various measurement methods.
Steps for calibrating calcium hardness using a method blank.
Restoring factory calibration settings for calcium hardness.
Calibration procedure for the Fluoride Method 170.
How to perform custom calibration for specific methods.
Saving custom calibration factors for user-defined methods.
Removing custom calibration data from the instrument.
Using Profi-Mode for simplified routine analysis operations.
Utilizing the One Time Zero feature for efficient calibration.
Customizing user options, including managing the method list.
Creating and adapting a custom list of available measurement methods.
Enabling or disabling all measurement methods in the list.
Entering and storing custom concentration measurement methods.
Step-by-step guide to inputting a new user concentration method.
Entering and storing custom polynomial calibration curves.
Removing user-defined methods from the instrument.
Outputting data for user-defined polynomials and concentration methods.
Resetting the user method system to default settings.
Accessing and using special functions of the photometer.
Calculating the Langelier Saturation Index for water balance.
Detailed procedure for calculating the Langelier saturation index.
Choosing between Celsius and Fahrenheit for temperature readings.
Configuring display contrast and brightness settings.
Modifying the contrast level of the LCD display.
Accessing system information and service functions.
Viewing software version and memory status.
Methods for transferring data to a PC or printer.
Instructions for printing data using a connected printer.
Steps for transferring measurement data to a personal computer.
Information on the instrument's enclosure and detailed technical specifications.
Guidance on unpacking and inspecting the instrument.
Summary of key technical specifications for the photometer.
Glossary of abbreviations and terms used in the manual.
Solutions for common operating messages and error conditions.
Explanations of display messages and corrective actions for errors.
Welcome and overview of the HydroCheck HC1000 meter.
Steps for unpacking and checking the HydroCheck HC1000 meter.
Inventory of standard accessories included with the meter.
Explanation of the meter's LCD display elements and indicators.
Description of the meter's keypad and the function of each key.
Details on the meter's connectors for various sensors.
Instructions for connecting pH, Conductivity, and DO sensors.
Guide to connecting the pH electrode securely to the meter.
Procedure for attaching the conductivity electrode to the meter.
Steps for connecting the DO probe to the meter.
Instructions for installing and replacing the meter's batteries.
Procedure for refilling the electrolyte solution in the DO probe.
Overview of basic operations and measurement modes.
How to turn the meter on, off, and manage auto-off functions.
Steps for performing accurate pH measurements with the meter.
Guide to conducting ORP (Oxidation-Reduction Potential) measurements.
Instructions for measuring conductivity, TDS, and resistivity.
How to measure salinity in practical and seawater modes.
Steps for measuring dissolved oxygen levels in water samples.
Using the meter's data hold features to freeze readings.
Managing stored measurement data, including input and recall.
Accessing and navigating the meter's setup menu for configuration.
Procedures for adjusting various meter settings and parameters.
How to exit the setup menu and return to measurement mode.
Configuring the meter's internal clock and date settings.
Understanding and configuring temperature compensation for measurements.
Enabling and using the automatic temperature compensation feature.
Manually inputting temperature values for compensation.
Detailed guides for calibrating the pH sensor.
Step-by-step guide for performing a single-point pH calibration.
Instructions for conducting multi-point pH calibration.
Calibrating the meter using custom pH buffer solutions.
Checking the calibration status and diagnostic information for the pH electrode.
Steps for calibrating the ORP sensor.
Reviewing the calibration status and offset for the ORP electrode.
Instructions for calibrating the conductivity sensor.
Performing a single-point calibration for conductivity measurements.
Conducting multi-point calibration for conductivity.
Manually inputting cell constants for conductivity calibration.
Checking the calibration factor and date for the conductivity electrode.
Calibrating the DO sensor using percentage saturation.
Performing a one-point calibration for DO at 100% saturation.
Conducting a two-point calibration for DO saturation.
Calibrating the DO sensor for concentration measurements.
Performing a two-point calibration for DO concentration.
Calibrating the meter's temperature sensor.
Guidelines for cleaning, maintaining, and reactivating electrodes.
Instructions for cleaning and maintaining ORP electrodes.
Procedures for cleaning and maintaining conductivity electrodes.
Tips for keeping the DO probe membrane moist and maintaining it.
Solutions for common problems and error messages displayed by the meter.
Formula and method for calculating the temperature coefficient.
Formula for determining the TDS conversion factor.
Reference table correlating pressure with altitude.
Details on warranty terms and customer support contact information.
General| Brand | Aquasafe |
|---|---|
| Model | WSL50 Pro |
| Category | Safety Equipment |
| Language | English |
To Next Page
