Need help?Do you have a question about the AquaScape 83001 and is the answer not in the manual?
General| Model | 83001 |
|---|---|
| Category | Waterfall |
| Pump Included | No |
| Dimensions | 94cm L x 69cm W x 43cm H |
| Weight | 35 lbs |
Explains warning and tip symbols used in the manual.
Crucial safety precautions for electrical shock and installation.
Technical details for the AquaSurge 2000 pump.
An overview of the installation process in nine steps.
Guidance on choosing the ideal location for the waterfall.
Instructions for unpacking and preparing kit components.
Detailed steps for assembling the AquaBlox support structure.
Positioning the vault and AquaBlox components.
Procedure for digging the basin to the correct depth.
Ensuring the excavated basin is level and soil is compacted.
Installing the protective underlayment and waterproof liner.
Final placement of the vault and AquaBlox units.
Securing the AquaBlox by backfilling the basin perimeter.
Routing the pipe and digging the trench for the waterfall.
Connecting the pump and tubing for water flow.
Placing rocks and gravel to build the waterfall structure.
Stacking rocks to create the waterfall cascade.
Connecting and positioning the waterfall spillway.
Detailed instructions for securing the spillway fitting.
Using foam sealant to direct water flow and disguise gaps.
Filling the basin and monitoring the water level.
Connecting power and adjusting the waterfall's appearance.
Trimming excess liner after the waterfall is running.
Adding mulch and plants to integrate the waterfall.
Final step: Enjoying the completed waterfall.
List of available replacement parts for the pump.
Details on product warranties and coverage terms.
To Next Page