Smart Control Receiver
Item #45038
INSTALLATION INSTRUCTIONS
facebook.com/AquascapeInc
youtube.com/aquascape4
twitter.com/AquascapeInc
For more information about our company or products, please visit our website at
aquascapeinc.com or call us at US (866) 877-6637 CAN (866) 766-3426
©2019 Aquascape, Inc. • All Worldwide Rights Reserved 10/19
SMART CONTROL
RECEIVER
No. Description
1. Smart Control Receiver
2. Smart Control Conversion Plug
Contents - #45038
Warranty Information
Troubleshooting
• Device won't pair
– Make sure the outlet is receiving power
– Make sure you have adequate wireless coverage to connect
the device (2.4 GHz networks supported)
– Reset the device to factory defaults
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped
1
2
3 YEAR WARRANTY
Aquascape Smart Control Receiver is guaranteed for three years
from date of purchase. Proof of purchase required. Warranty does not
cover damage resulting from negligent handling, misuse, or lack of care.
Warranty is valid against defect due to material and workmanship only.
Products returned must be cleaned, sanitized, or decontaminated,
as necessary, prior to shipment to ensure that employees will not be
exposed to health hazards in handling said material. All applicable laws
and regulations shall apply. The sole obligation shall be to replace the
defective unit with a suitable replacement unit. Units should be checked
for proper operation prior to returning as defective. No liability for loss
or damage of any nature or kind, whether arising out of or from the
use of the product, whether defective or not defective, is assumed by
Aquascape, Inc. or it's affi liates.
Safety Information
WARNING: It is recommended whenever working in or near
water to have all electrical devices plugged into a ground fault
interrupter (GFCI) that has been installed by a licensed electrician.
• The power cable should be protected at all times to avoid punctures,
cuts, bruises, and abrasion.
IMPORTANT: Aquascape, Inc. is not responsible for losses, injury,
or death resulting from a failure to observe these safety precautions,
misuse or abuse of pumps or equipment.
Installation
• Mount the receiver above the ground on a post, fence, or wall (Ex. 1).
• Connect the pump to the Smart Control Receiver.
NOTE: If connecting a previous generation of the Adjustable Flow Pump,
please use the included Conversion Plug (Ex. 2).
• Plug the Smart Control Receiver into an outdoor rated GFCI, and the unit
will automatically enter pairing mode (Ex. 1).
• Download the Aquascape Smart Control App (available on iOS or
Android App Store).
• Open the Aquascape Smart Control App and click 'Create New Account'.
NOTE: If you already have an account, login with your username and
password.
• Once logged in, click the three dashes
in the upper right-hand corner of the
home screen (Ex. 3).
• Click 'Add New Device' (Ex. 4).
• Enter the Wi-Fi network and password
for the network to which the unit will
connect (Ex. 5).
NOTE: Adequate Wi-Fi coverage is
required (2.4 GHz networks supported).
• Continue to follow on-screen instructions
to complete the pairing process.
• To reset the device to factory defaults,
fi rst turn the unit off by pressing the power
button, then press and hold the + and -
buttons for four seconds and release
when the LED display lights up completely (Ex. 6).
• The receiver includes a switch that allows the pump to be operated in the
two following modes (Ex. 7).
O
Position 1 - Operated by Aquascape Smart Control App or
remote control
–
Position 2 - Bypass control, and operate at full fl ow-rate
• In the event of a power loss the pump will revert to the last fl ow-rate
setting.
Ex. 6
Ex. 7
REQUIRED
• Adequate Wi-Fi coverage reaching to the unit (2.4 GHz networks supported)
• Aquascape Smart Control App (available on iOS or Android App Store)
NOTE: The blinking blue light on the face of the unit indicates the receiver
is in pairing mode and ready to be connected.
Ex. 1
3
Y
E
A
R
W
A
R
R
A
N
T
Y
G
A
R
A
N
T
I
E
D
E
T
R
O
I
S
A
N
S
3
Ex. 2
Ex. 3
Ex. 4
Ex. 5
45038 Smart Control Receiver [instructions].indd 1 10/14/2019 9:28:49 AM
To Next Page
Need help?
General
