AquaSource FP4A0067CP - Connector and Supply Line Connections

13
12
14
8
ASSEMBLY INSTRUCTIONS
Connect and tighten the water supply line nuts
by using two wrenches.
Note: Ensure the supply lines are not being
kinked during installation and note the red line is
for hot and blue line is for cold. When attaching
the exible hoses, ensure there is no signicant
twisting or deformation. Do not bend into a V or L
shape. Do not use if there are any visible signs of
damages.
13.
14.
12.
Attach the quick connector (G) to the quick
connect tube (D). Pull down the quick con-
nector (G) to ensure it is secure.
NOTE: For removal, see “Quick Connector
Removal page 10.”
Reattach the quick connector (G) to the hose (K).
www.lowes.com
F
D
G
G
K