Aqueon ProFlex - Sump Placement and Plumbing

9
9. Position drip tray from Biological Filter Kit on top of second row of tabs in chamber 2.
10. Slide adjustable wall down so that spout rests on drip tray.
11. Place sump in desired position underneath aquarium.
12. Attach drain hose(s) from Megafl ow™ overfl ow kit(s) or ProFlex overfl ow box(s) to inlet
elbow fi tting(s).
13. Position submersible return pump within chamber 3.
14. Attach return tubing to pump outlet. Be sure the return tubing contains either a check valve
(not included) or a siphon break to prevent siphoning of the aquarium into the sump during a
power outage.
Suggested Aqueon
®
Submersible Pumps
AQUEON PROFLEX PROFLEX PROFLEX PROFLEX
SUBMERSIBLE PUMP MODEL 1 MODEL 2 MODEL 3 MODEL 4
2500 x
3000 x x
3500 x x x
4000 x x
15. Other devices such as protein skimmers and chemical reactors can be set up within chamber 3
if appropriate to the design of the device. Or they can sit outside the sump with their inlets and
returns located within chamber 3.
Suggested Coralife
®
Protein Skimmers
CORALIFE PROFLEX PROFLEX PROFLEX PROFLEX
SUPER SKIMMER MODEL 1 MODEL 2 MODEL 3 MODEL 4
65 Berlin or
External only x
125 x x x
220 Berlin or
External only x