Aquila A211 User Manual

PILOT’S OPERATING HANDBOOK
and
FAA APPROVED AIRPLANE FLIGHT MANUAL
AQUILA A211
Model: AQUILA AT01-100
Serial Number: AT01-100A-
Registration:
Document Number: FM-AT01-1010-101
First Issue: 28.05.2013
Certified according to: JAR-VLA
This Pilot's Operating Handbook (POH) must be carried on board the aircraft at all times.
The amendment history and revision status are provided in the list of effective pages and in
the list of revisions.
The aircraft must be operated in compliance with the procedures and operating limits
stated herein.
This manual constitutes the FAA Approved Airplane Flight Manual (AFM) for operation in
the U.S. in accordance with FAR 21.29.

Aquila A211 Specifications

General

Wingspan	10.30 m (33 ft 10 in)
Length	7.48 m (24 ft 6 in)
Height	2.55 m (8 ft 4 in)
Empty weight	485 kg (1, 069 lb)
Fuel capacity	140 L (37 US gal; 31 imp gal)
Range	1, 296 km (805 mi, 700 nmi)
Seating Capacity	2
Manufacturer	Aquila Aviation
Type	Light aircraft

Summary

Pilot's Operating Handbook and FAA Approved Airplane Flight Manual AQUILA A211

Section 0 - POH / AFM AQUILA AT01-100

Introduction to the Pilot's Operating Handbook

Overview of the aircraft and its operating handbook.

Section 2 - Limitations

Airspeed and Power Plant Limitations

Maximum airspeeds and power plant operating limits.

Weight, CG, and Maneuver Limits

Aircraft weight, CG, maneuver, and load factor limits.

Section 3 - Emergency Procedures

Engine Failure and Forced Landing Procedures

Checklists for engine failures and procedures for forced landings.

Fire, Icing, Spin, and Glide Procedures

Procedures for smoke/fire, icing, spin recovery, and power-off glide.

Section 4 - Normal Procedures

Daily and Pre-Flight Inspections

Checklists for daily and pre-flight aircraft inspections.

Pre-Start to Engine Start Procedures

Procedures for pre-start checks and engine start-up.

Taxiing and Before Take-off Checks

Procedures for taxiing and final checks before takeoff.

Landing, Go-Around, and After Landing Procedures

Procedures for landing, go-around, and post-landing shutdown.

Section 5 - Performance

Stall Speeds and Crosswind Component

Stall speed data and demonstrated crosswind component.

Flight Planning and Take-off Performance

Guidance for flight planning and takeoff distance calculations.

Climb, Cruise, and Descent Performance

Section 6 - Weight and Balance / Equipment List

Aircraft Weighing Procedures and Data

Determining Weight and Balance for Flight

Steps to calculate weight and balance for a specific flight.

Section 7 - Aircraft Description and Systems

Flight Controls and Instrument Panel Layout

Power Plant and Fuel System Details

Details of the engine, propeller, and fuel system components.

Electrical, Pitot-Static, and Stall Warning Systems

Section 8 - Handling, Service & Maintenance

Modifications, Repairs, and Ground Handling

Requirements for modifications, repairs, and ground handling procedures.