AR Blue Clean 600 Series User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ASSEMBLY, CARE AND USE

INSTRUCTIONS FOR

PRO600-CCRT

SPECIAL EDITION

IMPORTANT: RETAIN THESE

INSTRUCTIONS AND ATTACH RECEIPT

TO MANUAL FOR FUTURE REFERENCE.

READ CAREFULLY

Questions, problems, missing parts?

Before returning to your retailer, call our customer service department

at 1-866-235-5112, 8 a.m. - 5:00 p.m., CST, Monday - Friday.

www.arblueclean.com

PRO600CCRT

600 Series Cart and Accessories Kit

Table of Contents

Questions and Answers:

G
Gregory MorrisonJul 28, 2025
How to fix low pressure on my AR Blue Clean 600?
- A
  arellanomistyJul 28, 2025
  If the AR Blue Clean Outdoor Cart experiences low pressure, start by cleaning the nozzle and checking for any blockages. Ensure there's sufficient water flow to the pump; increase it if needed. Also, pull out the inlet screen and clean it carefully. Using a larger diameter supply hose can also help. Finally, inspect the pump valves for debris, wear, or damage, and replace them if necessary. Torque valve caps to 300 in/lbs.
S
Shelly Haas MDAug 11, 2025
Why is my AR Blue Clean Outdoor Cart pressure surging?
- A
  Anne YoungAug 11, 2025
  Surging pressure in your AR Blue Clean Outdoor Cart can be caused by a restricted supply due to undersized fittings or a dirty inlet. Try using larger fittings and cleaning the inlet screen. Insufficient water flow to the pump can also cause this issue, so increase the water flow. Another potential cause is air trapped in the pump head. To resolve this, squeeze the gun trigger before starting the machine, then start the engine and run water until all the air is purged from the system. Lastly, check the pump valves for debris, wear, or damage, and replace them if needed. Torque valve caps to 300 in/lbs.

AR Blue Clean 600 Series Specifications

General

Brand	AR Blue Clean
Model	600 Series
Category	Outdoor Cart
Language	English

Summary

Safety Instructions

Included in the Box

Wand and Nozzle Protector

Protective sleeve for the pressure washer wand and nozzle.

Trigger Gun

The handle and trigger assembly for operating the pressure washer.

Foam Cannon Kit

Kit used for applying foam detergent to surfaces.

Size 3.5 Nozzles

Set of quick-connect nozzles for different spray patterns.

Cart Base

The wheeled base unit for the pressure washer.

Cart Top/Reel

Upper section of the cart with the hose reel.

Mounting Hardware

Assorted nuts, bolts, and caps for assembly.

Assembly

Cart Assembly

Instructions for assembling the cart base and top/reel components.

Gun Assembly

Steps for connecting the wand, nozzle, and hoses to the trigger gun.

Operating Instructions

Using Foam Cannon

Guidance on mixing detergent and operating the foam cannon.

Cleaning Tips

Advice on nozzle usage, chemical application, and cleaning techniques.

Troubleshooting

Low Pressure Issues

Common causes and solutions for low pressure.

Surging Pressure Issues

Common causes and solutions for surging pressure.

Pressure Washer Limited Warranty

Warranty Conditions

Specific conditions and exclusions for the warranty coverage.

Liability of Manufacturer

Defines the extent of the manufacturer's responsibility.

Customer Return Liability

Details responsibilities for returning products for warranty.

Warranty Returns Process

Instructions and contact information for warranty claims.