Arada Hamlet - Lighting Your Stove; Fuel Overloading

Hamlet Stove User Guide
Figure 1: Single door stove air inlet controls.
Sliding the knob to the right will increase the amount of air intake to the
stove, as shown in position 4 (in gure 1). To decrease, push the slider to
the left, as shown in position 3 (in gure 1).
4.1.2 Airwash system / Secondary air
The airwash/secondary air inlet has an internal sliding plate with slots,
housed in a cover plate, and is located either above or at the top of the
re door.
Sliding the control knob to the right as far as it will go, achieves the fully
open position, see position 2 (in gure 1). Sliding it to the left will shut o
the air inlet slots as shown in position 1.
5 Lighting your stove
5.0.3 Fuel overloading
The maximum amount of fuel specied in this manual should not be
exceeded, overloading can cause excess smoke.
BK540 Rev1 6