To Next Page
A
Amanda PowellAug 3, 2025
What to do if totalizers do not progress during the passage of liquid in ARAG Measuring Instruments?
- BBrenda MunozAug 3, 2025
If the totalizers aren't progressing during liquid passage, there could be a few reasons. First, the flow rate might be outside the meter's operational limits, requiring a replacement of the flowmeter with a more suitable model. Second, the sensor connection may be faulty, so verify the sensor connection. Finally, the paddle-wheel could be locked; try cleaning it, or replace the paddle-wheel group if needed.
General
