8
English
WARNING :
Never use petrol, thinner, benzene or any other solvents.
To replace the fabric covering, ensure it is turned right side out, and stretch
the covering over the pad, and adjust the covering to lie smoothly. Then push
the rectangular collar through the pad assembly and adjust into final position.
To replace a cheekpad in helmet, slip pad onto strap.
Place the front tab toward the front of the helmet and push the rear part of pad
until the pad is fully home.
Replace the neckroll tab into place.
Pull the chinstrap to check possible chinstrap play in the cheekpad.
To Next Page
Loading...
