Arai Open Face Series User Manual

OPEN FACE SERIES
INSTRUCTIONS FOR USE READ THIS BOOKLET BEFORE USE!

Arai Open Face Series Specifications

General

Brand	Arai
Model	Open Face Series
Category	Motorcycle Accessories
Language	English

Summary

Shield and Vent Operations

To Open/Close Shield

Instructions for opening and closing the helmet shield.

To Operate Browvents

Guide for operating the brow vents on the helmet.

To Operate Top Vents

How to operate the top vents on the helmet.

Remove and Replace Shield

X-TEND / X-TEND RAM / XC / XC RAM / SZ-RAM4 / SZ-URBAN

Procedure for removing and replacing the shield on specific Arai helmet models.

Remove and Replace Shield Holding Arms

X-TEND / X-TEND RAM / XC / XC RAM / SZ-RAM4 / SZ-URBAN

Steps to remove and replace the shield holding arms on specific helmet models.

Remove and Replace Shield/Peak

X-TEND CT / X-TEND RAM CT / CT-Z

Instructions for removing and replacing the shield and peak for CT models.

Remove and Replace Cheekpads/Earcups

X-TEND / X-TEND CT / X-TEND RAM / X-TEND RAM CT / XC / XC-RAM / CT-Z

Procedure for removing and replacing cheekpads for specific Arai helmet models.

SZ-RAM4 / SZ-URBAN Earcups

Specific instructions for removing and replacing earcups on SZ-RAM4 and SZ-URBAN helmets.

Remove and Replace Chinstrap Covers

X-TEND RAM / X-TEND RAM CT / XC-RAM / CT-Z (except CT-Z for Australia)

Procedure for removing and replacing chinstrap covers for specific Arai helmet models.

SZ-RAM4 Chinstrap Cover

Instructions for removing and replacing the chinstrap cover on the SZ-RAM4 helmet.

Remove and Replace Comfort Lining

X-TEND RAM / X-TEND RAM CT / XC-RAM / CT-Z (except CT-Z for Australia)

Procedure for removing and replacing the comfort lining in specific Arai helmet models.

SZ-RAM4 Lining

Details on removing and replacing the comfort lining for the SZ-RAM4 helmet, including temple pads.