8
310 Series Single-WAN Gigabit VPN Router
Quick Start Guide
Step 3: Connect
The router is powered by an IEC cable. Power o all your network devices before connecting the router.
Connection Procedure
Step 1: Power o all network devices.
Step 2: Connect the modem(s) to the WAN port(s).
Step 3: Connect the LAN cable(s).
Step 4: Connect any USB devices (optional).
Step 5: Connect the router to AC power.
A: Power supply input.
B: USB 3.0 port.
C: Reset button (simple reboot/factory reset)
D: LAN ports.
E: WAN ports.
F: LAN/WAN combo ports (configure optionally).
A
B
C
D E
F