Aramsco Syclone XL - User Manual

07-02353A F588 1 Aramsco
Owner’s Manual
Syclone XL Portable Dehumidifier
Model F588 #00000
Aramsco™ A Safeguard Industrial Company
1480 Grandview Ave., Paulsboro, NJ 08066
The Aramsco Syclone XL dehumidifier reduces humidity in enclosed environments by removing
water vapor from the air. The Syclone XL is rugged, durable and highly portable, making it ideal
for water damage restoration, structural drying, construction, and other applications requiring
temporary, high-performance dehumidification.
S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your dehumidifier
in any way. Use only replacement parts authorized
by Aramsco Modifications or use of unapproved
parts could create a hazard and will void your
warranty. Contact your authorized distributor for
assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
 Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
 Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
 The unit must be operated on a 120V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
 Keep motor and wiring dry.
 Do not attempt to repair the unit. For Authorized
Service Centers, contact Aramsco.
CONTROLS AND OPERATING
INSTRUCTIONS
Set unit upright
NOTICE: Transporting or storing the unit in a
horizontal position is not recommended. When the
machine is placed in a horizontal position, the oil
from the compressor can flow into the refrigerant
coils and reduce the ability of the dehumidifier to
function and possibly damage the unit. If the unit
has been placed in a horizontal position, set it
upright and let it stand for at least 30 minutes before
turning it on.
Positioning a Dehumidifier
For best results, operate your dehumidifier in an
enclosed area. Close all doors and windows to maximize
the unit’s water removal efficiency. Place your
dehumidifier away from obstructions, and keep it away
from anything that could obstruct airflow into and out of
the unit.
Extend handle
Release the handle by rotating red locking lever
outward, then lift handle up into place. Rotate red lever
back into locked position to secure handle in operating
position.
WARNING
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or
dehumidifier resulting from improper removal
of the power cord is not covered by warranty.
The IEC power cord is a wear item and is not
covered by warranty.

Summary

Safety Instructions

General Safety Warnings

Important safety instructions regarding modifications, electrical hazards, and grounding.

Correct Plug Removal

Instructions for safely unplugging the power cord to prevent damage and warranty voidance.

Setup and Operation

Unit Placement and Handling

Guidelines for setting the unit upright and positioning it for optimal performance.

Handle Operation

Instructions for extending and locking the unit's handle for use.

Drain Hose Setup

Steps for connecting and positioning the drain hose for automatic water removal.

Powering the Unit

Instructions for plugging in the electrical cord and turning the unit on.

Control Panel and User Settings

Control Panel Overview

Description of the control panel buttons, display, and operational modes.

User Settings Adjustment

Guide to adjusting user-configurable settings and accessing system information.

Error Message Interpretation

Explanation of control panel error messages and recommended user actions.

Job Completion Procedures

End of Job Water Removal

Steps to ensure all water is removed from the unit before moving or storage.

Transportation and Storage

Secure Moving and Storage

Important notices for handling, transporting, and storing the unit safely.

Maintenance Schedule

Pre-Use Inspection

Procedures for inspecting the electrical cord and filter before each use.

Monthly Maintenance

Guidance on inspecting and cleaning coils and exterior surfaces monthly.

As Needed Maintenance

Procedures for cleaning pump components, coils, and housing as required.

System Messages

Control Panel System Messages

Explanation of system messages displayed on the control panel and user actions.

Error Messages

Error Message Explanations

Detailed explanations and solutions for error codes displayed on the control panel.

Troubleshooting Guide

Common Faults and Solutions

Table of common operational faults, their causes, and recommended solutions.

Specifications

Technical Specifications

Detailed technical specifications of the Syclone XL dehumidifier.

Aramsco Syclone XL Specifications

General

Refrigerant	R410A
Dimensions (H x W x D)	35.5 x 20 x 21.5 in.
Power	830 W
Power Supply	115V
Amps	7.3 A