7
Note: Do not disconnect the USB connection during the
firmware update.
Further Support
For more guidance, please scan the QR code
below or visit: https://www.insta360.com/support/
supportdetail?name=link .
EN
2) Tap the Touch Key three times and check that
the white light flashes. Then, press and hold the
Touch Key for 5 seconds. Once the white light is
continuously illuminated, the camera will have entered
update mode.
3) Download the firmware update file here https://
www.insta360.com/download/insta360-link from
Insta360's official website. Copy the file to the
Insta360 Link hard drive named "INSTA360".
4) Repeat step 2, and let Insta360 Link reboot. The
blue light will flash slowly when the firmware is being
updated.
5) After successfully updating, Insta360 Link will
return to its standard mode with the blue light
illuminated.
To Next Page
Loading...