14 / JACK Instruction Manual 3789833-20200901
Original Instruction
5. BODY BUMPER POSITIONING
To prevent contact between the Jack and the vehicle, position the Jack’s
body bumper where the Jack may touch the vehicle.
6. HOOK ENGAGEMENT
The hook engages in the receptacle of most ARB bars.
It is recommended that you push the hook as far in as possible and to
ensure a secure lit.
Some bars may restrict the depth which the hook can be inserted. Do not
lower the hook below the restrictive plate as this may cause damage to
the bar.
NOTE: Ensure the hook
is secure and horizontal.
To Next Page
Loading...