Arbaco PLASMA COOL 14000E

Questions and Answers

K
Kimberly BradleyJul 31, 2025
What to do if my Arbaco Air Conditioner does not function properly?
- A
  Alexis JonesJul 31, 2025
  If your Arbaco Air Conditioner isn't working correctly, several factors could be the cause. First, ensure all windows and doors are closed. A dirty filter can also cause issues, so clean or replace it. Check that neither the air inlet nor outlet is blocked. Also, verify that the room temperature isn't lower than the temperature you've selected. Finally, if the overheat protection is activated, wait 3 minutes for the temperature to decrease before turning the unit on again.
P
Patrick WalkerAug 7, 2025
How to fix Arbaco Air Conditioner when the unit does nothing?
- N
  newmanjoshuaAug 7, 2025
  If your Arbaco Air Conditioner unit isn't turning on, start by checking the power supply to ensure the outlet is working. Make sure the green light on the L.C.D.I. plug is illuminated and press the restart button. If the LCD light is flashing, drain the unit. Also, check if the timer function is set and, if so, deactivate it.
M
Michelle PhelpsAug 15, 2025
Why is my Arbaco Air Conditioner remote control not working?
- R
  Rhonda TrujilloAug 15, 2025
  If the remote control for your Arbaco Air Conditioner isn't working, first make sure you're close enough and aiming the remote directly at the control panel. If that doesn't work, the batteries might be dead, so try replacing them.
D
deanjacksonAug 22, 2025
How to reduce noise from Arbaco Air Conditioner?
- K
  kelly10Aug 22, 2025
  If your Arbaco Air Conditioner unit is making excessive noise, it might not be standing on a level surface. Try placing it on an even surface to reduce the noise.