Arboria Rosedale Arbor User Manual

1
2
3
4
P L E A S E R E A D C O M P L E T E L Y B E F O R E Y O U B E G I N A S S E M B L Y
Rosedale Arbor
A S S E M B L Y I N S T R U C T I O N S
2
22
2
PRELIMIN A R IES
TOOLS Y OU WILL NEED
• Power screwdriver or drill that accepts interchangeable
bits*
• Two bags of concrete mix (60#) to anchor the arbor
* A bit holder may be needed if using a drill with a quick-change chuck.
If you wish to stain or paint your arbor, we recommend that you do so before assembly, it makes the job eas-
ier. Use a high quality exterior stain or paint. Be careful not to cover up guide marks on top of headers.
IF YOU PLAN TO
HANDY TO HAVE
• Tape measure
• Carpenters Square
• Stool or short ladder
WORK AREA
Select an area close to where the arbor will be finally placed. While the assembled unit is not very heavy, it is
awkward to move far and requires two people to do so easily.
The assembly area should be relatively flat and open, at least 8’ square. A lawn, driveway or wide path will be
satisfactory.
It is a good idea to lay out the arbor box on your work surface to protect the arbor from nicks and scratches.
445.35.98 4/27/2007
Trellis Caps (7)
Headers (2)
Braces (4)
Lattice Side Panels (2)
1
2
3
4
HARDWARE
- 2 1/2” Wood screws (30)
- Driver bit (if other than Phillips head)
- Wood block marked “spacer” (1)
- Anchoring kit
CHECK BOX FOR THESE CONTENTS
Win FREE Arboria Products
Win FREE Arboria ProductsWin FREE Arboria Products
Win FREE Arboria Products
Give us feedback about this Arboria product and be entered into a drawing to win Arboria goods. It’s easy, go to
www.Arboria.com, choose a product then click on the link to review
reviewreview
review. Be sure to enter your email and telephone so
that we may contact you if you win. Upload a photograph for an extra chance to win.
Upload a photograph for an extra chance to win. Upload a photograph for an extra chance to win.
Upload a photograph for an extra chance to win. Visit www.Arboria.com for offi-
cial rules. No purchase necessary.

Arboria Rosedale Arbor Specifications

General

Brand	Arboria
Model	Rosedale Arbor
Category	Lawn and Garden Equipment
Language	English

Summary

Check Contents and Tools

Check Box for Contents

Lists all hardware and components required for assembly, including screws, braces, and panels.

Tools You Will Need

Specifies essential tools like a power screwdriver or drill, and optional tools for convenience.

Work Area Preparation

Recommends selecting a flat, open area for assembly, ideally 8' square, and protecting the arbor.

Header and Side Panel Assembly

Attach First Header

Connects the first header board to a side panel using pilot holes and screws, ensuring correct alignment.

Attach Second Header

Attaches the second header board to the other side panel, mirroring the method used for the first.

Squaring and Brace Attachment

Square Up the Arbor

Ensures the arbor structure is square using a Carpenter's Square or tape measure before final screw insertion.

Attach Braces to Headers and Panels

Secures the four braces to the posts and header boards using the specified screws and pilot holes.

Cap Pieces and Arbor Installation

Attach Cap Pieces

Centers and attaches the cap pieces across the headers using screws and provided spacers.

Install Arbor with Concrete Anchors

Details anchoring the arbor posts into the ground using concrete, ensuring plumb and level placement.