MODEL 207A AND 207A-1
OPERATION MANUAL
Doc. No. 740044
Rev F
SECTION VII - CALIBRATION
7.6 MISCELLANEOUS MAINTENANCE ITEMS
1. BATRAM (continued)
Replacing the BATRAM requires accessing the inside of the M-207A. A
complete replacement procedure is available in the M-207A Maintenance
Manual (#740078).
2. RS232 COMMUNICATIONS
The M-207A can shut down the RS232 port on it own if it detects
non-intelligent information on it. This can be caused by ambient
light or improper set up. The RS232 port will not be re-activated
until the power has been re-set. If you are having problems with
RS232 communications, re-set the power and try again.
NOTE
Always keep the plastic dust covers on the RS232 port when not in use.
7.11
To Next Page
Loading...