Arcam rPAC - Page 13

11
Specication
Utilisation
technische Daten
Werking
Especicaciones
Характеристики
DAC TI PCM5102
Frequency response 10Hz — 20kHz, ±0.1dB
Total Harmonic Distortion + Noise 0.002%
Signal-to-noise ratio (A –Weighted, line out) 106dB (24-bit)
Line output level 2.15Vrms
Supported sample rates 44.1kHz, 48kHz, 88.2kHz, 96kHz
Bit depth 16-bit, 24-bit
Headphone output power 138mW
Headphone signal-to-noise ratio 98dB
Power requirements 2.5W max
Dimensions (wxdxh, mm) 100 x 62 x 25
Weight 300g
E&OE. All specications are typical.