EasyManua.ls Logo

Arcan ALSS15 User Manual

Arcan ALSS15
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ALSS15 1 09/06/19
Model ALSS15
1,500 lb. Under Hoist Support Stand
For Technical Questions, Call: 1-800-879-7316
WARNING
WARNING INFORMATION
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
BEFORE USING THESE STANDS, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using these stands. It is also the responsibility of
the stand owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost
or not legible, contact Arcan® Professional Tools for replacements. If the operator is not fluent in English, the product and safety
instructions shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his
designee, making sure that the operator comprehends its contents.
THE NATURE OF HAZARDOUS SITUATIONS
The use of portable automotive lifting and support devices is subject to certain hazards that cannot be prevented by mechanical means,
but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the
use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its
proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly secured loads, overloading,
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.
METHODS TO AVOID HAZARDOUS SITUATIONS
Read, study, understand and follow all instructions before using.
User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.
This stand is intended to assist in supporting under vehicle components, not the vehicle.
Inspect the stand before each use. Do not use if damaged, altered, modified, in poor condition, or has loose or missing hardware or
components. Take corrective action before using the stand.
Center load on saddle. Do not use ends of saddle to support load.
Adequately support the vehicle before starting repairs.
Be sure vehicle, vehicle component and stand are stable before performing any work.
Do not use beyond rated capacity. Do not shock load.
Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufacturer's
authorized representative.
Use only on a hard level surface capable of supporting the load.
Failure to heed these warnings may result in fatal personal injury and/or property damage.
CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS
could cause accidents resulting in serious or fatal personal injury and/or property damage.
WARNING: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING
WARNING
WARNING
Question and Answer IconNeed help?

Do you have a question about the Arcan ALSS15 and is the answer not in the manual?

Arcan ALSS15 Specifications

General IconGeneral
BrandArcan
ModelALSS15
CategoryRacks & Stands
LanguageEnglish

Summary

WARNING INFORMATION

Safety Alert Symbol and General Warnings

Explains the safety alert symbol and general warnings for potential injury hazards.

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

Pre-Operation Manual Review and Owner Responsibility

Emphasizes reading the manual thoroughly, understanding procedures, and owner responsibility for personnel.

THE NATURE OF HAZARDOUS SITUATIONS

Understanding Inherent Hazards

Details hazards associated with lifting devices, requiring user intelligence, care, and common sense.

METHODS TO AVOID HAZARDOUS SITUATIONS

Safety Practices and Precautions

Outlines essential practices like wearing eye protection, inspecting equipment, proper loading, and stable use.

Chemical Exposure Information

Warns about potential exposure to chemicals like nickel, linked to cancer and birth defects.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Risks of Non-Compliance

Highlights that failing to follow instructions can result in severe personal injury or property damage.

OWNER'S MANUAL

SETUP

Step-by-step instructions for assembling the support stand, identifying parts.

OPERATING INSTRUCTIONS

Guidance on safe and proper operation of the support stand, including positioning and load application.

PREVENTATIVE MAINTENANCE

Instructions for maintaining the stand, including storage, cleaning, lubrication, and inspection procedures.

PARTS DRAWING AND PARTS LIST

Component Identification

Visual representation and list of all parts included in the support stand assembly.

SPECIFICATIONS

Product Specifications

Details key technical specifications such as capacity, height, base size, and weight.

LIMITED WARRANTY

Information on the warranty coverage, terms, conditions, and exclusions for the product.