EasyManuals Logo

arcelik 5060 T User Manual

arcelik 5060 T
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 EN
Therefore, the heights described in
the figure should be followed.
To prevent dirty water refilling the
machine, and to allow for easy
discharge, the end of the hose must
not be submerged in the drain water.
The end of the hose must be able
to take in air. The hose should be
pushed into the drainage for more
than 15 cm. If it is too long you may
have it shortened.
The end of the hose should not be
bent, it should not be stepped on and
it must not be folded between the
drain and the machine.
the length of the hose is too short,
you may add an extension hose to
the original section. The length of the
hose must not be longer than 3.2
m after coming out of the machine.
To avoid water leakage failures, the
connection between the extension
hose and the drain hose of the
product must be fitted well with an
appropriate clamp as not to come off
and leak.
Electrical connection
Connect the machine to an earthed
outlet protected by a fuse of suitable
capacity.
Important:
Connection should comply with
national regulations.
Power cord plug must be within easy
reach after installation.
The voltage and the allowed fuse
protection are specified in the section
“Technical Specifications”.
The specified voltage must be equal
to your mains voltage.
Connection via extension cords or
multi-plugs should not be made.
B
A damaged power cable must be
replaced by a qualified electrician.
B
The appliance must not be operated
unless it is repaired! There is the risk
of electric shock!
Destroying the packaging
material
Packaging material can be dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to
waste directives. Do not dispose them
together with normal domestic wastes.
Packaging materials of your machine are
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an
environmental friendly manner.
You may refer to your local agent or
solid waste collection center in your
municipality to learn how to dispose
of your machine.
Before disposing of your old washing
machine, cut off the mains plug and
make the door lock unusable.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the arcelik 5060 T and is the answer not in the manual?

arcelik 5060 T Specifications

General IconGeneral
Brandarcelik
Model5060 T
CategoryWasher
LanguageEnglish

Related product manuals