22
Checking electrolyte level
Check the fluid level in each filler. If neces-
sary add only distilled water.
Do not overfill.
Checking electrolyte gravity
1. Place the hydrometer in the cell.
Be sure the float is not in contact with the
cylinder wall.
2. Take in enough electrolyte into the
hydrometer to allow the float to suspend
freely between the top and bottom of the
cylinder.
3. Read indication.
Other
climates
Over 1.20 1.26
Frigid
climate
Over 1.22 1.28
Tropical
climate
Over 1.18 1.24
Fully charged
Permissible value
value [at 20°C
(68°F)]
To Next Page
Loading...