Picture to show how to remove the bottom casing
Remove the battery Picture to show the scards position
1 2
Picture to show how to remove the bottom casing
Remove the battery Picture to show the scards position
1 2
Picture to show how to remove the bottom casing
Remove the battery Picture to show the scards position
1 2
After you have unpacked your mobile phone box:
1. Remove the device’s back cover using the notch.
2. Insert your SIM card or Memory card in the corresponding slot.
3. Insert the device’s battery.
4. Replace the back cover.
3G/2G slot 1 Micro-SIM
3G/2G slot 2 Micro-SIM
Memory card slot 3 Micro-SD card
When inserting your SIM card or micro-SD card,
make sure to follow the illustration, otherwise you
may damage the slot or the card.
Assembling