Arcisan SY04117 - User Manual

Synergii Toilet Suite
SY04117 (Slim Seat) and SY04127 (Standard Seat)
SY04118 (Slim Seat) and SY04128 (Standard Seat)
Installation Guide
www.streamlineproducts.com.au | Ph: 1300 735 352
This Synergii Bottom Inlet Toilet Suite is designed for
a left or right hand bottom inlet installation.
A 1/2” male thread will need to be plumbed in at the
location shown.
The standard set-out for a S-Trap is 80-200mm.
All distances are from final floor or finished wall.
The installer will need to supply the stop tap.
For bottom inlet the installer will also need to supply
the flexible hose for connection between the inlet and
the stop tap.
A 500mm length flexible hose will suit most installations
but the required length is dependent on the position of
the stop tap.
1
Back
Inlet
80-200
185
210
100
50
735
Optional elbow for set out 160-220mm (JT34)
Dimensions are in millimeters and are subject to manufacturing variations. Streamline reserves
the right to vary specications at any time without notice. Information provided within this
installation sheet is correct at the date of printing.
Version: 1.0 - March 2016
This product installation must comply to AS/NZS 3500.
B
A
210
min
210
min
200 max 200 max
Bottom
Inlet

Summary

Synergii Toilet Suite Installation Guide

Bottom Inlet Requirements

Details physical requirements, dimensions, and diagrams for bottom inlet toilet suites.

Back Inlet Requirements

Details physical requirements, dimensions, and diagrams for back inlet toilet suites.

General Plumbing and Set-Out

Specifies plumbing, stop tap, flexible hose needs, and standard S-Trap set-out.

Pan Installation Steps

Pan Positioning and Fixing

Instructions for positioning the pan, marking fixing bolts, and drilling holes.

S-Trap Installation

Guidance for installing the S-Trap pipe, including wall fixing and elbow alignment.

Cistern Placement and Securing

Steps for attaching pan bolts and centering the cistern onto the pan.

Outlet Seal and Final Pan Location

Correct procedure for fitting the outlet seal and final pan positioning.

Inlet Connection Procedures

Bottom Inlet Cistern Connection

Connects flexible hose to inlet pipe at cistern bottom and secures cistern.

Back Inlet Cistern Connection

Removes inlet mechanism, connects hose to stop tap, and places inlet valve.

Inlet Valve Operation Check

Verifies inlet valve function and adjusts float level using thumbscrew.

Seat Installation

Seat Fixing Bolt Installation

Instructions for inserting fixing bolts into the holes in the toilet pan.

Washer Placement and Tightening

Guide on pushing plastic/metal washers and finger-tightening screws.

Seat Positioning and Locking

Steps to push seat onto posts, square it, and tighten posts with a spanner.

Arcisan SY04117 Specifications

General

Brand	Arcisan
Model	SY04117
Category	Toilets
Language	English