Owner’s Information Manual
A09034
Fig. 1 – Unit PHD4 and WPH4
Our products are designed, tested and built in accordance with DOE standardized procedures; however, actual operating results and efficiencies may
vary based on manufacturing and supplier tolerances, equipment configuration, operating conditions and installation practices.
PHD4, WPH4
14 SEER Single and Three Phase
2-5 Nominal Tons (Sizes 24-60)
Single Packaged Heat Pump System with R-410A Refrigerant
Technician Name
Phone Number
Address
Company Name
Date Installed
NOTE TO EQUIPMENT OWNER:
For your convience, please record the model and serial numbers of your new equipment in the spaces
provided. This information, along with the installation data and dealer contact information, will be
helpful should your system require maintenance or service.
UNIT INFORMATION
ACCESSORIES (List type of model #)
INSTALLATION INFORMATION
DEALERSHIP CONTACT INFORMATION
This manual must be left with the eqipment owner.
NOTE TO INSTALLER:
Model #
Serial #
To Next Page
General