Arctic Air Ultra User Manual

Lists and illustrates all parts included with the Arctic Air Ultra cooler.

Place the unit on a flat surface and connect the power adapter.

Remove the filter, pre-soak it, and optionally freeze for enhanced cooling.

Open the water tank door and fill with water up to the MAX FILL line.

Turn the unit on/off and cycle through fan speeds (High, Medium, Low).

Use the air direction tab to control the airflow direction up or down.

Control the night light's brightness or turn it off.

Press the power button until the fan and indicator lights turn off.

Clean the filter via dishwasher or hand wash with soap and water.

Soak filter in water and vinegar solution to remove mold or unpleasant smells.

Clean the filter tray, grill, and water tank using appropriate methods.

Wet the filter under cold water; freezing it provides extra cooling.

Place the unit on a flat surface and fill the water tank using a pitcher.

Aim the unit towards you and adjust the grill to direct airflow.

Regular filter cleaning is recommended; consult the manual or label.

Covers safe handling, power connection, and unit placement to prevent hazards.

Guidelines on dry locations, avoiding sunlight, and child supervision during use.

Warnings on child safety, manufacturer responsibility, filter replacement, and proper disposal.