To Next PageTo Next Page
Need help?Do you have a question about the Arctic Cat 2012 700 i TRV/GT and is the answer not in the manual?
General| Brand | Arctic Cat |
|---|---|
| Model | 2012 700 i TRV/GT |
| Category | Offroad Vehicle |
| Language | English |
Crucial instructions to prevent severe injury or death by following manual procedures and paying attention to warnings.
Always wear appropriate clothing for riding to feel more comfortable and reduce injury chances.
Helmet is the most important piece of protective gear; ensure compliance with standards.
Wear eye protection like goggles to prevent dirt and items from entering eyes.
Goal is to protect body from branches, grass, airborne objects, or anything else scraping skin.
Hands are targets for objects and branches; gloves provide skin protection and shield from weather.
Check tires, controls, lights, oil, fuel, chassis, and miscellaneous items before every ride.
ATV handling is difficult on paved surfaces; avoid them.
Maintain ATV; do not operate if improper functioning is detected.
Avoid riding when physically exhausted; coordination and judgment are affected.
Dangers of speeding, wheelies, jumps, and stunts leading to injury or death.
Do not let untrained individuals ride due to potential danger.
Steps for starting the engine safely, emphasizing outdoor operation for ventilation.
Procedure for starting the engine when cold, including choke usage.
Procedures for stopping the ATV smoothly and safely.
Importance of active riding and shifting body weight for control.
Techniques for turning by shifting body weight for optimal handling.
Method and precautions for riding uphill safely.
Technique for riding downhill safely, emphasizing brake control.
Steps to stop the ATV.
Steps to stop the engine.
Procedure for checking engine oil level on level ground.
Schedule for initial service and regular maintenance tasks.
Procedure for changing engine oil and cleaning the oil screen.
Procedure for changing transmission lubricant.
Inspecting hand brake system and brake lever lock.
Checking and adjusting front and rear wheel brake systems.
Cleaning and recharging the battery for peak performance.
Recommended procedure for battery maintenance charging.
Procedure for charging the battery.
Procedure for safely jump-starting a vehicle with a dead battery.
Importance of keeping the air filter clean for engine power and gas mileage.
Using specified tire size/type and maintaining proper inflation pressure.
