Need help?Do you have a question about the Arctic Cat 2015 M 8000 and is the answer not in the manual?
General| Brand | Arctic Cat |
|---|---|
| Model | 2015 M 8000 |
| Category | Snowmobiles |
| Language | English |
Key safety rules including no drinking and driving, wearing a helmet, and checking controls.
Adherence to passenger capacity and using secure towing equipment.
Importance of understanding the manual, obeying laws, and being aware of surroundings.
Locates and explains the importance of VIN and Engine Serial Numbers for service and warranty.
Illustrates typical locations of key controls on the handlebars for ZR/XF and M models.
Specifies the type of gasoline to use, including octane and ethanol content.
Details the specific Arctic Cat C-TEC2 Synthetic 2-Cycle Oil for the oil-injection system.
Provides instructions on how to safely fill the gas tank, including warnings about ventilation and open flames.
Details the necessary break-in period and procedures for new or rebuilt engines.
Explains the break-in process for new drive belts to ensure proper function and longevity.
Describes the functions and operation of the standard speedometer/tachometer with digital readout.
Details how to view and reset odometer, trip meters, hour meter, and set the clock.
Explains how to switch between RPM and MPH displays and view maximum RPM.
Explains the meaning and function of warning icons like Service, Coolant Temp, and Low Oil.
Provides instructions for setting the clock and calibrating the altimeter.
Details how diagnostic codes are activated and what action to take when they appear.
Lists specific trouble codes for 6000 and 8000 models and their associated issues.
Details the procedure for adjusting the handlebar tilt on ZR/XF models.
Explains how to adjust handlebar height and tilt on M models.
Explains how to adjust the angle of the speedometer/tachometer.
Highlights the function and importance of the exhaust system and air-intake silencer.
Covers inspection, leakage checks, and coolant level management.
Details battery maintenance, charging, and safe jump-starting procedures.
Explains cleaning requirements for drive clutches and driven clutches.
Details how to check and correct alignment for proper belt function.
Addresses suspected fuel delivery problems and recommends dealer service.
Discusses track types, wear issues, and precautions for track stud installation.
Covers procedures for engaging, operating, and stopping in reverse, with safety precautions.
Step-by-step guide for removing and installing the hood and access panel.
Outlines how to engage and operate the reverse gear, including indicator lights and alarms.
Instructions for removing and reinstalling the standard removable seat.
Specific steps for removing and installing the seat on 'M' models.
Explains the APV system's function, maintenance, and potential issues.
Provides guidelines on how to safely tow the snowmobile using another vehicle.
Describes the ECT system's automatic ignition timing adjustments and troubleshooting.
Explains altitude impact on performance and the necessity of recalibration.
Details procedures for checking, adding, or replacing chain case lubricant.
Covers lubricating rear suspension grease fittings for proper operation.
A comprehensive checklist of daily, weekly, and seasonal maintenance tasks.
Lists various methods for stopping the snowmobile in different situations.
Explains the throttle monitor switch and safety actions for throttle system malfunctions.
Covers checking fluid level, adding fluid, and changing brake fluid.
Details checking brake lever travel and bleeding the brake system for proper feel.
Explains checking, changing, and burnishing brake pads for optimal braking.
Covers inspecting the drive belt for wear, cracks, and proper fit.
Provides steps to adjust drive belt deflection by adding/removing shim washers.
Explains how to check and adjust track tension for optimal performance and safety.
Details how to check and adjust track alignment for proper wheel and lug interaction.
Covers adjusting front ski shock spring tension and limiter straps.
Provides procedures for adjusting air pressure in Fox Air Shocks.
Explains adjustment of front and rear arm shock springs and limiter straps.
Discusses the purpose, wear, and replacement of ski wear bars for steering control.
Explains how to adjust the vertical aim of the headlight beam for optimal visibility.
Provides instructions for installing ski wear bars and adjusting ski stance width.
Details the steps required to service the snowmobile before storing it.
Outlines the checks and adjustments needed to prepare the snowmobile for use after storage.
Details U.S. EPA emission warranty coverage, components, and owner responsibilities.
Explains procedures for updating owner information or transferring the warranty.
Outlines the process for obtaining warranty service and owner responsibilities for maintenance.
To Next Page
