Why is my Arctic Cat Wildcat ROV 2013 engine not starting (no spark)?
If your Arctic Cat Offroad Vehicle engine isn't starting and there's no spark, try the following: * Clean or replace the spark plug(s). * Clean and dry the spark plug(s). * Replace the stator coil. * Replace the ECM. * Replace the ignition coil. * Replace the high tension lead.
What to do if Arctic Cat Wildcat ROV 2013 engine will not start or is hard to start (Compression too low)?
If your Arctic Cat Offroad Vehicle engine is hard to start and the compression is too low, you can try the following: * Adjust the clearance. * Repair or replace the guides. * Retime the engine. * Replace the rings. * Replace the cylinder. Also, check the electrical system.
Why does my Arctic Cat Wildcat ROV 2013 Offroad Vehicle engine lack power?
If your Arctic Cat Offroad Vehicle engine lacks power, consider these solutions: * Adjust the clearance. * Replace the springs. * Time the camshaft. * Replace or service the rings and cylinder. * Repair the seats. * Clean or replace the spark plug. * Replace the arms and shafts. * Adjust the gap or replace the spark plug. * Replace the fuel injector. * Clean the element. * Drain excess oil and change the oil. * Tighten or replace the manifold. * Replace the cam chain and sprockets.
Why is my Arctic Cat Wildcat ROV 2013 Offroad Vehicle engine overheating?
If your Arctic Cat Offroad Vehicle engine is overheating, you can try the following: * Clean the piston. * Add oil. * Drain or replace the gasoline. * Replace the pump. * Replace the filter. * Tighten or replace the manifold. * Fill and examine the system for leaks. * Check the fan fuse and replace the fan if needed. * Replace the fan relay. * Replace the thermostat. * Clear any obstruction and replace hoses or the cap if necessary. * Replace the fuse(s).
What to do if Arctic Cat Offroad Vehicle exhaust smoke is dirty or heavy?
If the exhaust smoke from your Arctic Cat Offroad Vehicle is dirty or heavy, here are some possible solutions: * Drain excess oil and change the oil. * Replace or service the rings and cylinder. * Replace the guides. * Replace the cylinder. * Replace the valves. * Replace the seals.
How to fix an Arctic Cat Wildcat ROV 2013 Offroad Vehicle that stalls easily?
If your Arctic Cat Offroad Vehicle engine stalls easily, try these solutions: * Clean or replace the spark plug(s). * Replace the stator coil. * Replace the ECM. * Replace the fuel injector. * Adjust the clearance.
How to fix poor idling on an Arctic Cat Wildcat ROV 2013?
If your Arctic Cat Offroad Vehicle engine idles poorly, consider the following: * Adjust the clearance. * Replace the valves or cylinder head. * Replace the guides. * Replace the arms and shafts. * Replace the stator coil. * Replace the ECM. * Adjust the gap or replace the spark plug(s). * Replace the ignition coil. * Replace the fuel injector.
Why is my Arctic Cat Wildcat ROV 2013 engine noisy (noise from crankshaft)?
If the noise seems to come from the crankshaft of your Arctic Cat Offroad Vehicle engine, the following steps may help: * Replace the bearing. * Replace the crankshaft assembly. * Tighten or replace the clutch. * Tighten or replace the flywheel or crankshaft.
Why is my Arctic Cat Wildcat ROV 2013 Offroad Vehicle engine noisy (excessive valve chatter)?
If your Arctic Cat Offroad Vehicle engine has excessive valve chatter, consider these solutions: * Adjust the clearance. * Replace the spring(s). * Replace the arm or shaft. * Replace the camshaft.
How to troubleshoot Arctic Cat Offroad Vehicle engine running poorly at high speed?
If your Arctic Cat Offroad Vehicle engine runs poorly at high speed, consider these possible solutions: * Shift into a higher gear or decrease speed. * Replace the springs. * Retime the engine. * Replace the cams or arms. * Adjust the gap. * Replace the ignition oil. * Clean the element. * Clean and prime the hose.
General| Brand | Arctic Cat |
|---|---|
| Model | Wildcat ROV 2013 |
| Category | Offroad Vehicle |
| Language | English |
Details on chassis and general specifications.
Specifications for tightening bolts and fasteners.
Conversion table for torque values.
List of special tools required for maintenance.
Schedule for regular maintenance tasks.
Locations requiring periodic lubrication.
Procedure for cleaning and inspecting the air filter.
Checking and adjusting valve clearance.
Inspecting and replacing spark plugs.
Procedure for changing engine oil and filter.
Step-by-step guide for engine removal.
Step-by-step guide for engine installation.
Service procedures for top-side engine components.
Service procedures for left-side engine components.
Service procedures for right-side engine components.
Procedures for servicing center crankcase components.
Diagnosing and resolving no spark issues.
Diagnosing and resolving engine noise issues.
Diagnosing and resolving engine power loss.
Diagnosing and resolving battery charging issues.
Diagnosing and resolving steering oscillation.
Information on battery maintenance and charging.
General guidelines for testing electrical components.
Inspecting and testing the TPS.
Using the digital gauge for diagnostics.
Removing, installing, and testing the front drive actuator.
Procedures for removing and servicing the front differential.
Procedures for removing, disassembling, and servicing brake calipers.
Procedures for removing, inspecting, and installing the master cylinder.
Overview and troubleshooting of the EPS system.
Procedures for removing and installing the rack and pinion assembly.
Procedures for removing and installing the steering wheel.
Procedures for removing and disassembling steering knuckles.
Procedure for checking and adjusting front wheel alignment.
To Next Page