12 / 44
o after each use, shake the filter and remove any dust
residues using a brush;
o after several uses, if the suction power seems to have
reduced, wash the filter with cold water only, then let it dry
completely before putting it back in place (do not use
dryers or other means).
Note: washing in water gradually deteriorates the filter. If,
after washing the filter, the suction power still seems
reduced, replace the filter.
Reassemble the parts on the unit only when completely dry.
- To clean the unit externally, use a soft and slightly damp cloth.
Do not use overly wet substances, liquids or cloths, because
any infiltration could damage the unit irreparably.
Do not use alcohol or chemicals to clean the unit and the filter.
NEVER SOAK THE UNIT IN WATER.
DISPOSAL
PACKAGING
In order to respect the environment, packaging material must be
disposed of properly in accordance with separate collection.
Check local regulations.
USER INFORMATION
“Implementation of Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE)”,
pertaining to reduced use of hazardous substances in
electrical and electronic equipment, as well as to waste
disposal.
The symbol of the crossed-out wheelie bin on the equipment or on its
packaging indicates that the product must be disposed of separately
from other waste at the end of its service life.
The user must therefore take the dismissed equipment to suitable
separate collection centres for electrical and electronic waste.
For more details, please contact the appropriate local authority.
Suitable segregated collection of the equipment for subsequent
recycling, treatment or environmentally-friendly disposal helps
prevent damage to the environment and to human health, and
To Next Page
Loading...
