22
Press button to increase the temperature or button to decrease
it: the set temperature will change from a minimum of 15°C to a maximum
of 40°C.
show the room temperature after a few seconds.
In automatic mode, the device will automatically regulate the heating
power based on the dierence between the room temperature and the set
temperature. In this operating mode, the device will also switch between
the various power levels (ventilation, low power, high power) repeatedly.
The selected power level is always shown on the display. Once the set
temperature has been reached, ventilation will still remain active in order
to monitor the room temperature more eectively.
button and manually select the
GB
Maintenance
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
Never use abrasives or chemical solvents.
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Dust inside the appliance
Use a vacuum cleaner on the back grid.
To Next Page
Loading...
